What is M.2? PCIe SSDs Explained. ft. ADATA SP900 M.2
If you've ever opened a PC case and stared inside, or looked at a bare motherboard, you may be taken aback by the number and variety of connectors, pins, and slots that exist on a modern PC motherboard.
In this guide I'll identify some of the most common and a few uncommon connectors on motherboards used in most home PCs.
I won't cover server- or workstation-class boards here, just what you might find in a typical midrange or world call codes home PC.
For a similar discussion of the ports that you're likely to encounter on the exterior of a PC case, see "" Since no single motherboard contains every type of connectors, I've used photos of four different boards to illustrate key examples.
In one or two instances, there is some overlap; but for the most part, connectors are mentioned only once.
Many of them may exist across different motherboard designs, however.
Asus P5WDH Deluxe Let's start with an older motherboard, an Asus P5WDH Deluxe.
This motherboard has a few connectors that aren't included on current-generation boards, as wll as some that world call codes are still included, but are more readily visible here.
Connections on an older Asus P5WDH Deluxe motherboard.
Audio front panel: This ten-pin connector links to the front-panel headphone and microphone inputs.
The particular connector shown is an AC97 connector, which existed prior to multichannel HD audio.
It's still in common use today.
Azalia digital audio header: You rarely find this connector, used to tie the motherboard to multichannel digital all slots in motherboard on the case, on current motherboards.
Serial-port header: This connector isn't physically present on the board shown--you can just see the solder points for it.
But this header does appear on a few modern boards.
It supports a nine-pin, RS-232 serial port, usually as a bracket that occupies a slot space on the back of the case.
A number of RS-232 connections remain in use today, mostly in point-of-sale devices or specialized test instruments.
Consumer boards typically don't all slots in motherboard them.
FireWire IEEE 1994a : Once common as a digital camcorder interface, FireWire has largely been supplanted by USB, and the all slots in motherboard makers are gradually phasing it out.
Some professional audio hardware still uses FireWire, though; you may also occasionally find higher-speed IEEE 1394b headers, but they are even rarer.
SATA connectors: These components consider, bonus all slots casino/ariana 2 opinion via cables to various storage devices, including hard-disk drives, solid-state drives, and optical drives.
IDE connector: Rarely found today, IDE connectors were used to link to older hard drives.
In addition, until a couple of years ago, many optical drives supported IDE.
Today, all new storage devices ship with SATA.
Floppy disk connector: The venerable 3.
But unless you have a pile of old floppies, you won't need a floppy drive.
And if you do find yourself needing a floppy drive, you can always pick up an external, USB-connected drive.
Intel DP67BG Now let's examine a more recent motherboard: an Intel D67BG, based on Intel's P67 chipset and supporting LGA 1155 CPUs like the Sandy Bridge-based Core i7-2600K.
Intel D67BG motherboard: a modern Intel design.
DDR3 memory sockets: Current-generation PC systems use DDR3 memory, but in many instances they support different operating speeds.
The P67 chipset used in this board maxes out at DDR3-1600, but to achieve that level of speed you'd have to overclock the chipset--officially the P67 supports only DDR3-1333.
Here, we see four memory sockets.
The system supports dual-channel memory, meaning that the system is populated with paired memory modules, which are mounted in sockets of the same color.
CPU fan header: This connector is specifically designed to link to the CPU cooling fan.
The system BIOS monitors CPU cooling fan speeds; and if the fan isn't connected to spinner takes all slot header, you may get an error at bootup.
Eight-pin ATX12V CPU power connector: Back when the Pentium 4 processor first shipped, Intel realized that high-performance CPUs needed their own source of clean, dedicated power beyond what the standard 24-pin power connector could deliver.
Thus was born ATX12V.
You'll see four-pin connectors on lower-end boards supporting CPUs with lower thermal design power TDPbut the eight-pin version of the connector is used with higher-end processors and on boards that users may overclock.
Power for secondary fans: Many motherboards with secondary-fan power headers; these connectors are mainly used to power and monitor various case fans.
PCI Express x1 connector: PCI Express is a serial interface, though multiple lanes may be ganged together.
Sound cards, for example, are typically PCIe x1 devices.
PCI Express x16 graphics : PCI Express x16 slots are used mostly for graphics cards, though they can be used with any PCI Express card.
Confusion may arise, however, because not all PCIe x16 slots are true PCIe x16.
Occasionaly, world call codes see PCIe x16 connectors that are physical slots for accommodating graphics cards, but are actually eight-lane x8 or even four-lane x4 electrically.
On some boards, even slots that support true 16-lane PCI Express for graphics may revert to eight lanes if you install a second graphics card into a second PCIe x16 slot on the motherboard.
The P67 chipset, for instance, this web page only 16 total PCIe lanes for graphics.
source if you drop world call codes two graphics cards to run in dual GPU mode, each card will have just eight lanes available to it.
This situation isn't as bad as world call codes sounds, though, since even eight lanes in a PCIe 2.
A host of expansion cards support 32-bit PCI; and to accommodate them, most motherboards are likely to have at least one 32-bit PCI slot going forward.
You may see some system boards configured so that a particular back-panel case bracket can support either a PCI slot or a PCIe slot, with some overlap between the two because they're very close together.
Front-panel switch header: This header connects various wires to the front panel of the case, where they link to power and reset buttons, and status LEDs for power and storage-drive activity.
Next: Motherboards for AMD CPUs and for the Intel Z77 chipset PCWorld helps you navigate the PC ecosystem to find the products you want and the advice you need to get the job done.
PCI Express (PCIe) 3.0 - Everything you Need to Know As Fast As Possible
What type of expansion slots are on my motherboard? As mentioned above, every motherboard model is unique, so to determine the type of expansion slots on the motherboard, consult the board's specifications and owner's manual. You can also open the computer case and visually examine the motherboard.
Really and as I have not guessed earlier
What charming topic
In it something is. It is grateful to you for the help in this question. I did not know it.
I apologise, but, in my opinion, you commit an error. I can defend the position. Write to me in PM, we will talk.
All not so is simple
I apologise, but, in my opinion, you commit an error. I suggest it to discuss.
All not so is simple, as it seems
At all personal send today?
Willingly I accept. In my opinion, it is an interesting question, I will take part in discussion.
I think, you will come to the correct decision.
It was specially registered at a forum to tell to you thanks for support.
I agree with you, thanks for an explanation. As always all ingenious is simple.
I can recommend to visit to you a site on which there is a lot of information on this question.
The made you do not turn back. That is made, is made.
Something at me personal messages do not send, a mistake what that
I can not participate now in discussion - it is very occupied. But I will be released - I will necessarily write that I think on this question.
Your phrase is matchless... :)
Bravo, brilliant phrase and is duly
For a long time I here was not.
In my opinion it is obvious. I will refrain from comments.
In my opinion you are mistaken. I can defend the position. Write to me in PM.
Radically the incorrect information
You commit an error. I can prove it.
I apologise, but, in my opinion, you are not right. I am assured. I can defend the position. Write to me in PM, we will communicate.
As that interestingly sounds